Справочник Пользователя для Godex International Co. Ltd. 6PDL7
3. Control Panel
3-1. Control Panel Introduction
Control keys
FEED
PAUSE
CANCEL
LED indicators
Power Power
on
Ready(Power)
After turning on the power,
the Ribbon and Media lights
will flash alternately until the
completion of initialization.
the Ribbon and Media lights
will flash alternately until the
completion of initialization.
Ribbon
Ribbon status indication
Media Media
status
indication
3-2. Control Keys Introduction
FEED Key
After pressing the FEED key, printer will send the media (according to media type) to the
specified stop position. When printing with continuous media, pressing the FEED key will
feed media out to a certain length. When printing labels, pressing the FEED key will feed
one label at a time; if the label is not sent out in a correct position, please proceed with the
Auto Sensing (see page27).
specified stop position. When printing with continuous media, pressing the FEED key will
feed media out to a certain length. When printing labels, pressing the FEED key will feed
one label at a time; if the label is not sent out in a correct position, please proceed with the
Auto Sensing (see page27).
Pause Key
When pressing the Pause key in standby mode, the printer will go into the Pause Mode,
and LCD Display will indicate “DuraLabel-xxxx Vx.xxx Pause.” At this status, printer won’t
be able to receive any command. Then pressing the Pause key once again, the printer will
get out of the Pause mode and go back to standby mode.
and LCD Display will indicate “DuraLabel-xxxx Vx.xxx Pause.” At this status, printer won’t
be able to receive any command. Then pressing the Pause key once again, the printer will
get out of the Pause mode and go back to standby mode.
Pressing the Pause key while printing, printer will pause the print job. When the Pause key
is pressed one more time, the printer will continue with the rest of the print job. For
example, if the print job contains 10 labels, press the Pause key to stop printing after 2
labels are printed. When pressing the Pause key again, printer will finish the printing of the
remaining 8 labels.
is pressed one more time, the printer will continue with the rest of the print job. For
example, if the print job contains 10 labels, press the Pause key to stop printing after 2
labels are printed. When pressing the Pause key again, printer will finish the printing of the
remaining 8 labels.
Cancel Key
Pressing the Cancel key while printing, the LCD Display will show “Print job is cancelled”, it
means the printer cancels the current print job. For example, if the print job contains 10
labels, press the Cancel key after 2 labels are printed, the remaining 8 labels won’t be
printed, and the printer goes back to standby mode.
means the printer cancels the current print job. For example, if the print job contains 10
labels, press the Cancel key after 2 labels are printed, the remaining 8 labels won’t be
printed, and the printer goes back to standby mode.
With different combinations of FEED PAUSE and CANCEL keys, the printer can perform various
functions as follows:
DuraLabel 7000 User’s Manual
20