Техническая Спецификация для Cisco CP-DOUBLFOOTSTAND=
Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 2 of 4
Figure 1
Cisco IP Phone 7960 with Two Cisco 7914
Expansion Modules
Typical Scenario: You receive a call for your director at
extension 12345. You look at your Cisco 7914 Expansion
Module and see that your director has a call in progress
with another party and another call on hold. Looking at
the Cisco 7914 Expansion Module LCD, you note that
another manager in your group has just completed a
call and might be able to assist the incoming caller.
You consult briefly with the incoming caller and then
transfer the call to the available manager.
Features and Benefits
Line Key: Using the Cisco CallManager Administration
tool, the system administrator assigns one or more DN to
buttons on the Cisco 7914 Expansion Module as desired.
The line key will show the appropriate designation.
Speed Dial: Each button not used as a line (DN) key can
be programmed as a speed-dial key in the same manner as
the Cisco IP Phone 7960. You can use the Cisco IP Phone
User Options Web page to program a speed-dial number
and label the associated button with an appropriate name.
System Requirements
Cisco CallManager Version 3.1(2c) or later
Hardware Requirements
• Cisco IP Phone 7960 (CP-7960)
• Cisco IP Phone Expansion Module 7914 (CP-7914=)
(maximum of two modules) (Connecting cable
supplied with each Cisco 7914)
• New footstand is required, single
(CP-SINGLFOOTSTAND=) (Figure 2) or double
(CP-DOUBLFOOTSTAND=) (Figure 3) as
appropriate
• Power cube (CP-PWR-CUBE=) and cord
(CP-PWR-CORD-xx=) to supply local power
Figure 2
Required Items for Single Cisco 7914
Expansion Module Installation*
Figure 3
Required Items for a Double Cisco 7914
Expansion Module Installation