Справочник Пользователя для Infinet Malta Limited LM-5X18
InfiNet Wireless R5000
Technical User Manual
Copyright © 2004-2010 by InfiNet Wireless
40
rfX.0 - radio interfaces. See device‘s labeling or use ―ifconfig -a‖
command to learn your radio interfaces
command to learn your radio interfaces
wifi0 – Wi-Fi AP interface
pppX – point-to-point interfaces
tunX - interfaces used for IPIP tunnels building
vlanX – interfaces supporting VLAN 802.1q tagging
All configured interfaces of the Device can be reviewed using the following
command:
command:
ifco nfig -a
3. Command line interface (CLI)
For device‘s management and configuration a Unix-like command line language
is used. Every command starts having the power right after Enter key is pressed.
is used. Every command starts having the power right after Enter key is pressed.
However, each command lifetime duration is limited within one configuration
session. In order to save a current configuration ―
session. In order to save a current configuration ―
‖ command is
used.
Several commands can be grouped in one line using ―;‖ character. If a wrong-
syntax line is met in the group, the rest of the string is checked anyway and the
wrong command is ignored. Command name can be shortened unless the
ambiguity occurs.
If your terminal supports VT100 or ANSI standard you can move around the list
of recently executed commands using cursor keys. Numbered list of these
wrong command is ignored. Command name can be shortened unless the
ambiguity occurs.
If your terminal supports VT100 or ANSI standard you can move around the list
of recently executed commands using cursor keys. Numbered list of these
commands can be reviewed by ―!h‖ command. Any command from this list can
be available using ―!<NUMBER>‖ command. TAB key performs substring
search of recently executed commands.
Ctrl/R combination refreshes the command string if its content was disturbed by
system messages.
The command executed with no arguments prints a short hint about its keys,
parameters and syntax.
Context help can be obtained by printing ―?‖ in any position of the line.
be available using ―!<NUMBER>‖ command. TAB key performs substring
search of recently executed commands.
Ctrl/R combination refreshes the command string if its content was disturbed by
system messages.
The command executed with no arguments prints a short hint about its keys,
parameters and syntax.
Context help can be obtained by printing ―?‖ in any position of the line.
4. Lost password recovery
The system password can be recovered remotely. The procedure is the
following:
1. Locate your device‘s serial number (SN)
2. Send this SN to the InfiNet Wireless Technical Support
2. Send this SN to the InfiNet Wireless Technical Support
3. You will be given a special key
4. Enter the device and use SN as a login and received key as a password
5. Reconfigure the username and password
5. Reconfigure the username and password
Lost password recovery using Emergency Repair Console:
Recovery procedure can be done with the help of ―
erp
‖ command or graphical
―ERConsole‖ utility.
Below is a description of ―ERConsole‖ utility recovery procedure (―
erp
‖ command
recovery procedure is described in ―OS WANFleX User Manual‖):
1. Connect a computer and a device that should be repaired to one physical
1. Connect a computer and a device that should be repaired to one physical
Ethernet segment.