Справочник Пользователя для SHANGHAI MERIT TECHNOLOGY CORP. MT800

Motor disarming :

● When the Quad-copter finish landing, move the throttle stick in low position. Make 

sure the motors are spinning in slow speed; or the Quad-copter will rotate quickly. 

 

● Pull the joysticks as the picture above and stay 2 seconds -the blue LED on the 

right corner of the Quad-copter will flash once.

● Pull the joysticks till the motor is fully stopped. The motor disarming is completed.

GPS Hold :

● In GPS located situation, GPS-Hold (CH.5 at top position) flight mode will keep 

the Quad-copter’s stabilization and locked at a fixed altitude, coordinate and 
orientation. The Quad-copter won’t drift in the air due to the GPS lock to locate the 
coordinate in this flight mode.

● If GPS is not well located, the motor will not be armed. 
● If the GPS failed to locate in the air but the pilot activates GPS mode, the Quad-

copter will response as altitude hold mode. 

Altitude Hold :

● ALT-Hold (CH.5 at middle position) flight mode will keep the Quad-copter’s 

stabilization and locked at a fixed altitude & orientation, but the Quad-copter may 
drift in the air due to no GPS help to locate he The Quad-copter coordinate..

● In a no GPS condition (as indoor), it will be the only available flight mode; the 

GPS-Hold and RTL will be unvalid.

MOTOR DISARM 

MODEL 1

MODEL 2