Справочник Пользователя для Legend Lifestyle Products Corp. T-00

 

 

4 

Press the         button to zero the last saved value. Or by repeatedly pressing the 

“        “ button, the value of the flashing digit is gradually increased. Or by repeatedly 

pressing the “        “ button, the value of the flashing digit is gradually decreased. 

4. When the required torque / angle value is set, press the          button in order to save this 

pre-set value.   

5. Make sure that the highest permissible value is not exceeded! (See "Specifications") 

6. After approx. 2-3 seconds the display will show    " 0.0 " or    “0° “ 

 

 

 

 
 
 
 

 
 
 
Activating the "peak mode"   

1. After turning on the display, the torque wrench is in " Track “ mode, i.e. the real-time torque 

reached during operation will be displayed. During the " Peak “ mode, the maximum value 

reached will be saved additionally and displayed permanently. 

2. After the programming and saving of the torque has been completed, press the        

button. On the left upper side of the display, "peak" is shown 

 
 
 
Turning the display illumination on/off 

1. The display illumination can be turned on prior to or after programming the torque. 

2. In order to do this, press and hold the                button for 5 Sec.