Справочник Пользователя для GUANGDONG ROULE ELECTRONICS CO. LTD RL-IP02
Melody selection
ON/OFF- power
on or power off the unit
on or power off the unit
Coding button
Code
8
9
Technical Parameters
Camera: one megapixel CMOS
Power supply: DC 12V
Working current: <400mA
Max power consumption: <5W
Outline size: 163*85*62mm
Power supply: DC 12V
Working current: <400mA
Max power consumption: <5W
Outline size: 163*85*62mm
I. Factory Default Reset
·All the setting will be cleared if the factory reset is done, including WIFI information,
access password and alarm information. The operation method is as below:
·Find the reset button on the back of the device, use a needle to press and hold it for 3
seconds under standby mode, you can hear a sound saying “Reset the product
successfully, the system will restart”, which means the factory reset is done successfully.
access password and alarm information. The operation method is as below:
·Find the reset button on the back of the device, use a needle to press and hold it for 3
seconds under standby mode, you can hear a sound saying “Reset the product
successfully, the system will restart”, which means the factory reset is done successfully.
H. FAQ
1) The APP cannot find new devices when adding a device.
·Please check whether the doorbell and the mobile phone is in the same LAN.
·If wired network is used, please check whether the network indicator light is on.
·You can reset the device as factory default.
·If wired network is used, please check whether the network indicator light is on.
·You can reset the device as factory default.
2) Devices not online.
·Please click the refresh button on the top left corner to refresh the device status.
·Please check whether the doorbell is connected to network and the network indicator
light is on.
·Please check whether the router's network is normal. Please check whether the mobile
phone is connected to network normally.
·Please check whether the doorbell is connected to network and the network indicator
light is on.
·Please check whether the router's network is normal. Please check whether the mobile
phone is connected to network normally.
3) The camera is offline when talking
·Please check the device's online-state.
·5G network is not supported by the doorbell; please connect the mobile phone with
2.4G WIFI network.
·Please connect the mobile phone and the outdoor unit to the same wireless router.
After the network configuration is finished, remote controlling can be achieved on the
mobile phone through WIFI or 4G, 5G mobile network.
·5G network is not supported by the doorbell; please connect the mobile phone with
2.4G WIFI network.
·Please connect the mobile phone and the outdoor unit to the same wireless router.
After the network configuration is finished, remote controlling can be achieved on the
mobile phone through WIFI or 4G, 5G mobile network.
Sub unit code learning
1)Buttons Instruction：
·ON/OFF: Power on or power off the sub unit
·Code: Coding button ：
·ON/OFF: Power on or power off the sub unit
·Code: Coding button ：
·Melody selection
2)Code learning:
·Load batteries in the sub unit, press the coding button and then release, touch the
button on the outdoor main unit ( the indicator light will be on and it will transmit
signals), the sub unit will sound “DING-DONG” with the indicator light flashing blue
light when it receives the signals, which means the code is learned successfully.
3)Code clearing:
·Load batteries in the sub unit, turn the switch to OFF, press and hold the code button,
release it in about 2 seconds after turn the switch to ON. The sub unit will sound
“DING-DONG” with the indicator light flashing blue light, which means the code is
cleared successfully.
2)Code learning:
·Load batteries in the sub unit, press the coding button and then release, touch the
button on the outdoor main unit ( the indicator light will be on and it will transmit
signals), the sub unit will sound “DING-DONG” with the indicator light flashing blue
light when it receives the signals, which means the code is learned successfully.
3)Code clearing:
·Load batteries in the sub unit, turn the switch to OFF, press and hold the code button,
release it in about 2 seconds after turn the switch to ON. The sub unit will sound
“DING-DONG” with the indicator light flashing blue light, which means the code is
cleared successfully.
4)Technical Specification:
Battery: DC4.5V (AA*3)
Standby current: <0.25mA
Max working current: <175mA
Max volume: >85dB
Wireless receiving frequency: 433.92MHz
Receiving distance in open area: ≥
Standby current: <0.25mA
Max working current: <175mA
Max volume: >85dB
Wireless receiving frequency: 433.92MHz
Receiving distance in open area: ≥
80m
2) Vibrate Setting
Slide the vibrate button to turn on or turn off the vibration function when there is a call or
alarm.
alarm.
3) About
Check the current version, if the current version is not the latest version, you can download
the latest APP on our official website.
the latest APP on our official website.
4) Exit
Click the “Exit” button, the APP will be offline. Calling and alarm information messages will
be sent to the user's smart terminals.
be sent to the user's smart terminals.