Справочник Пользователя для Funkwerk Bintec W1002n 5510000165

Roaming (access point mode)

Seamless roaming with IAPP (artem Inter Access Point Protocol)

Fast roaming 802.1x (access point
mode)

Pre authentication and PMK caching allows fast roaming by 802.1x encryption

Roaming behaviour (client mode)

Adjustable (no, slow, normal, fast, customized roaming). Adaptable for fast movable client (i.e.
vehicle), to guarantee a roaming without interruption. This is achieved by scanning of the
relevant channels in the background.

WDS

Wireless Distribution System: Include high security TKIP and AES, interoperable with other
devices from the Funkwerk-EC portfolio (not bintec W500)

Bridge: point-to-point /
point-to-multipoint

Point-to-point connection between two access points, point-to-multipoint connection between
up to eight partners access points

Bridge

Full remote configuration: Protocol with encrypted transmission. RTS/CTS threshold
adjustable. Operating channels: According to the regulatory domain. Transmit speed: Auto
fallback or selectable fixed rate.

Bridge link test

Via the link test the quality of a bridge link can be measured.

Bridge link encryption

With high security TKIP and AES possible

Client mode

Routing or bridge mode possible. In bridge mode multiple IP based end devices can be
operated simultaneously and additionally one non-IP-based end device

Buffer pool

For cushioning of peaks

WMM 802.11e QoS

Data prioritization for TOS data, 802.11e/WMM

WMM Power Save (U-APSD)

Support of active WLAN clients, which support 802.11e power save

Internet dialup

PPPoE, PPTP

Load balancing

Session-round-robin, load-dependent bandwidth

BLD

Broken Link Detection (BLD) per SSID possible.

NTP

NTP client, NTP server, manually

DNS

DNS client, DNS server, DNS relay

DHCP

DHCP client, DHCP server, DHPC relay

Certifications

Wi-Fi Certified according 802.11abgn (Rel.7.9.4)

Standards and certifications

R&TTE Directive 1999/5/EG; EN 60950-1 (IEC60950); EN 300 328; EN 301 489-17;  
EN 301 489-1;  EN 301 893; EN 60601-1-2 (medical electrical devices - Part
1-2)

LAN / WAN

2 x 10/100 Mbps Ethernet twisted pair, autosensing, auto MDI/MDI-X

Serial interface

V.24 interface with D-Sub9 jack for configuration

WLAN

IEEE 802.11a/b/g/n; 1 radio module, 2.4 und 5 GHz band, 3 external antennas

Antenna

Three antenna connectors with RTNC jacks; delivered incl. three 2.5 dBi omni-directional
antennas

Real time clock

Even at power loss the system time will be available for several hours.

Power supply

External wall power supply 230V / 12 V DC, 1 A, with high efficient switching power supply

PoE

Power-over-Ethernet according IEEE 802.3af

Status LEDs

Status + activity for WLAN, Ethernet 1, Ethernet 2

Theft protection

Theft protection optional available

Wall mounting

Integrated in the housing design

Dimensions

Approx. 16.3 cm x 16.8 cm x 5 cm (width x depth x hight)

Weight

Approx. 400 g

Power consumption

Less than 10 Watt

Environment

Temperature operating: 0°C to 40°C; storage: -10°C to 70°C; rel. humidity 10 to 95% (non
condensing)

Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com 

bintec W1002n
07.09.2010
Subject to technical
alterations