Справочник Пользователя для 7signal INDR-EYE01
5 Upgrading Sapphire
48
7signal Solutions Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, info@7signal.com,
www.7signal.com
7
sig
n
al
Sa
p
p
h
ire
D
ep
lo
yme
n
n
t
G
u
id
e R
ele
as
e 5
.0
5.9 Start Sapphire solution (Linux)
After all components have been upgraded, start the Carat and Analyzer servers.
Step 1: Start the Carat server:
Step 1: Start the Carat server:
Start the Carat server by issuing the command:
# 7carat start
The Carat server starts in couple of seconds:
7signal Sapphire Carat is not running
Starting 7signal Sapphire Carat: OK
7signal Sapphire Carat is not running
7signal Sapphire Carat is not running
7signal Sapphire Carat is running
Step 2: Start the Analyzer server:
Start the Analyzer server by issuing the command:
# 7analyzer start
The Analyzer server starts in couple of seconds:
Starting 7signal Analyzer server: 7signal Analyzer server start complete
7signal Analyzer server is not running
7signal Analyzer server is running
7signal Analyzer server is not running
7signal Analyzer server is running
5.10 Eye upgrade
5.10.1 Eye upgrade (GUI)
Note: The Eye SW version numbers in these instructions may not be the one that is going to
be installed. However, the instructions are applicable to all SW versions.
be installed. However, the instructions are applicable to all SW versions.
Step 1: Start the Carat GUI:
Step 2: If necessary, install new software version to Carat,:
This step needs to be executed only if Carat was updated without in-bundled Eye software packages (i.e.
“full” version was not used).
“full” version was not used).
Login as solution admin user.
Open the “Manage | Eye Software Management | SW repository management” view
-
Select “Import”
-
Browse the Eye software installer
o
APU3 installers are for 802.11a/b/g/n Eyes
o
APU2 installers are for 802.11a/b/g Eyes
o
x86 installers are for Soft Eyes
o
armv6 installers are for Micro Eyes