Справочник Пользователя для Essence Security International ltd. ES6500EGE
Operation
50
EverGuard Express
CMD Tab:
The CMD tab controls many of the security
commands in this single navigation pane.
commands in this single navigation pane.
It is divided into the following sections:
Security
Maintenance
Communication
Home Automation
To set the command options via the CMD tab:
1. On the Navigation pane, CMD tab, select Security, and set the Security mode
according to the desired method to secure the designated area. This is done
using remote upload.
using remote upload.
Arm – the system is fully armed
Disarmed – the system is disarmed
2. Under Maintenance, if the Panel Info dialog box reads INCOMPLETE after a
software update attempt, force the end of a software update.
3. Click Force End Installation.
4. To reset the Control Panel, click Reset Panel.
5. Under Communication Status, CCS is the default setting.
6. Under Communication, select one of the following three modes to change the
status in the Communication Status:
NTS
CCS
ITS
After any change, press the communication button, and a dialog box appears
to state that the Communication status is being changed.
to state that the Communication status is being changed.
7. Under Home Automation, to activate a door lock, click Door Lock.
8. To activate an RF Output device, click RF Output.