Справочник Пользователя для Essence Security International ltd. ES6500EGE
Operation
EverGuard Express
19
2. Using the number keys, enter the master PIN code. The Status LED flashes
green and one good beep is sounded. Programming mode is initiated.
3. Using the number keys, press 07. The Status LED flashes green and one good
beep is sounded.
4. Using the number keys, enter the Exit time in two digits. One good beep is
sounded. Programming mode automatically ends and the status LED turns
off.
off.
3.9
Setting Entry/Exit Countdown Beeps
You can set the EverGuard Express panel to play or not to play the Entry/Exit
Countdown beeps. The default settings are to not play the Entry/Exit Countdown
beeps.
Countdown beeps. The default settings are to not play the Entry/Exit Countdown
beeps.
To set the Countdown beep option:
1. Insert the Programming tool point into the Programming button. The Status
LED flashes red and one good beep sounds.
2. Using the number keys, enter the master PIN code. The Status LED flashes
green and one good beep is sounded. Programming mode is initiated.
3. Using the number keys, press 14. The Status LED flashes green and one good
beep is sounded.
4. To select the Countdown beep option, using the number keys, press:
0 – Countdown beeps are played by the EverGuard Express panel
1 – Countdown beeps are not played by EverGuard Express panel
Three beeps confirm that the countdown beeps are defined. Programming
mode automatically ends and the status LED turns off.
mode automatically ends and the status LED turns off.
3.10 Defining the Telephone Numbers for Incoming
Calls
You can add or modify up to 10 telephone numbers to be the only numbers to be
able to call into EverGuard Express panel with full duplex voice verification.
able to call into EverGuard Express panel with full duplex voice verification.
Note: You can modify an existing telephone number associated with a
number key, by repeating the procedure for the desired number key and
enter the new phone number.
number key, by repeating the procedure for the desired number key and
enter the new phone number.
For information on receiving an incoming telephone call, refer to Receiving a
Telephone Call on page 32.
Telephone Call on page 32.
To add or modify the telephone numbers for incoming calls:
1. Insert the Programming tool point into the Programming button. The Status
LED flashes red and one good beep sounds.
2. Using the number keys, enter the master PIN code. The Status LED flashes
green and one good beep is sounded. Programming mode is initiated.
3. Using the number keys, press 08. The Status LED flashes green and one good