Справочник Пользователя для Essence Security International ltd. ES800MGL
Installing with Screws
WeR@Home™ Installation Guide
53
Motion and Camera Detectors
The mounting-base has eight holes to allow for installation flexibility. Varying combinations of holes
allows you to install the camera or motion detector:
allows you to install the camera or motion detector:
Flat on a wall
On an angle facing to the right
On an angle facing to the left
In a corner
The thin plastic covering over the holes can be removed, if necessary. All the corner support holes are
blocked by the mounting-tape. You can drill through the tape, if needed.
blocked by the mounting-tape. You can drill through the tape, if needed.
To install the motion or camera detector using screws:
1. Release the mounting-base by lifting the tab and pushing it forward.
Figure 48: Release Mounting-Base