Справочник Пользователя для Mobotix BELLC
Importer:
MOBOTIX Corp.
80 Broad Street, Suite 702
New York, NY 10004
U.S.A.
Phone: +1 (212) 385 6126
Fax: +1 (212) 385 6129
us-sales@mobotix.com
Further information on www.mobotix.com:
• Products > Access Control > IP Video Door Station > T25 Outdoor Station and
Access Module
• Support > Download Center > Documentation > Certificates & Declarations of
Conformity
MOBOTIX, the MX logo, MxPEG and MxActivitySensor are trademarks of MOBOTIX AG
registered in the European Union, the U.S.A., and other countries • Information subject
to change without notice • MOBOTIX does not assume any liability for technical or edi-
torial errors or omissions contained herein • All rights reserved • © MOBOTIX AG 2018
Notes
• Please follow the notes on installing and operating the device in the MOBOTIX T25 System Manual
(
www.mobotix.com in the Support > Download Center > Documentation > Manuals section).
• The MOBOTIX BellRFID is only to be used in the original frames of the IP Video Door Station.
• Before Installing, make sure that the seal on the back of the BellRFID has been properly attached.
• When inserting the module into the frame, only press at the edge, never at the center of the module.
• Make sure the device is not operated outside of its operating temperature range of –30 to +60°C/–22 to +140°F.
• Before Installing, make sure that the seal on the back of the BellRFID has been properly attached.
• When inserting the module into the frame, only press at the edge, never at the center of the module.
• Make sure the device is not operated outside of its operating temperature range of –30 to +60°C/–22 to +140°F.
Dimensions
Back
99 mm/3.9
in
99 mm/3.9 in
Cindy Jones
Thomas Jones
The Jones Family
Dr. Jones, MD
Declaration of Conformity