Справочник Пользователя для Shenzhen Anbash Technology Co. Ltd. NC325PW

Before setting up the Network Camera over the Internet, make sure you have a router and follow the steps below. 
1. Connect your Network Camera behind a router, the Internet environment is illustrated below. 
Regarding how to obtain your IP address, please refer to on page 20 for details.             
 
 

 

 
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168.168.100, please forward the following ports for 
the Network Camera on the router. 
 

■ HTTP port 
■ RTSP port 
■ RTP port for audio 
■ RTCP port for audio 
■ RTP port for video 
■ RTCP port for video 

 
If you have changed the port numbers on the Network page, please open the ports accordingly on your router. For information on how to forward 
ports on the router, please refer to your router’s user’s manual. 
 
3. Find out the public IP address of your router provided by your ISP (Internet Service Provider). Use the public IP and the secondary HTTP port 
to access the Network Camera from the Internet. Please refer to Network Type on page 34 for details. 
 

Choose this connection type if you are required to use a static IP for the Network Camera.please refer to LAN on page 36 for details. 

 
Internet connection via PPPoE (Point-to-Point over Ethernet) 
 

Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to PPPoE on page 37 for details. 

 
 
 

 15