Справочник Пользователя для IDEMIA Identity & Security France MPHAC001A
Section 1 : Introduction
2015_2000007248-V1 - Draft
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior written authorization of Morpho
14
June 2015
Recommendations for terminal implementation
Every installation is unique. Sometimes the issues are well defined and can be
handled in a standard fashion; sometimes the issues are very specific and may not be
immediately recognizable.
handled in a standard fashion; sometimes the issues are very specific and may not be
immediately recognizable.
Morpho recommends following these steps for a successful installation:
Plan the installation - Choose the type of hardware required, decide if a network
is required, and decide on the location and number of required terminals.
is required, and decide on the location and number of required terminals.
Unpack all items - Unpack all items and check against the packing list.
Install network hardware components - Install the cabling and components
needed to run the system.
needed to run the system.
Install software - Install the software needed to set up the terminals.
Pre-configure device - Connect the terminals to the Ethernet, supply power to the
terminals, and pre-configure the terminals.
terminals, and pre-configure the terminals.
Mount devices - Mount the terminals in their final locations
Power distribution and device hook up - Connect the terminals wiring via the
back panel.
back panel.
Power-up procedure - Check the power connections, and then start the system
safely.
safely.