Справочник Пользователя для IDEMIA Identity & Security France MPHAC001A
Section 4 : Electrical Interface
2015_2000007248-V1 - Draft
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior written authorization of Morpho
45
June 2015
Wi-Fi
™ dongle installation
Wi-Fi™ dongle shall be preferably installed outside the product (separate area shall
be reserved in the wall) and connected to the internal USB Mini B (at the rear of the
terminal) using Morpho cable provided in the kit.
be reserved in the wall) and connected to the internal USB Mini B (at the rear of the
terminal) using Morpho cable provided in the kit.
Wi-Fi™ dongle shall not be exposed to temperature exceeding 50°C (don’t forget to
count the thermal dissipation of the product and of the Wi-Fi™ dongle).
count the thermal dissipation of the product and of the Wi-Fi™ dongle).
Wi-Fi™ feature requires the product to be powered from an external DC 12V to 24V
power supply (the POE doesn’t provides enough power for both the terminal and the
Wi-Fi™ dongle)
power supply (the POE doesn’t provides enough power for both the terminal and the
Wi-Fi™ dongle)
Only Wi-Fi™ dongle delivered by Morpho (kit reference XXX-TBD) may be installed
with the terminal for WLAN (Wireless Local Area Network) operation.
with the terminal for WLAN (Wireless Local Area Network) operation.
Cable has to be plugged on the upward USB connector of the rear panel, as on the
following image:
following image:
Figure 23: Wi-Fi™ dongle installation
Wi-Fi
™
USB
dongle
dongle
USB
extension
cord
extension
cord