Справочник Пользователя для Graupner GmbH & Co. KG MC-20
152 Detail program description - Timers (general)
Timers (general)
Timers on the basic display
The default transmitter display shows a total of three
timers. These are: the transmitter operating time on
the left of the display, plus a "Top" and a "Centr" timer
on the right of the display:
timers. These are: the transmitter operating time on
the left of the display, plus a "Top" and a "Centr" timer
on the right of the display:
#01
0:00h
Stop watch
Flight tim
K78
0:00.0
4.1V
0:00.0
0
0
0
0
0:00h
M
V
Graubele
H-J Sandbrunner
Normal
Runde
00
RX VOLT:4.9V
Another, fl ight-phase specifi c timer can also be
confi gured with settings in the two menus »Flight
phase timers«, page 156, and »Phase settings«,
pages 142 and 146. This optional fl ight phase timer –
such as the lap time timer – appears underneath the
"Centr" (fl ight time) timer:
confi gured with settings in the two menus »Flight
phase timers«, page 156, and »Phase settings«,
pages 142 and 146. This optional fl ight phase timer –
such as the lap time timer – appears underneath the
"Centr" (fl ight time) timer:
#01
0:00h
Stop watch
Flight tim
K78
0:00.0
4.1V
0:00.0
0
0
0
0
0:00h
M
V
Graubele
H-J Sandbrunner
Normal
Lap
00
0.0s
RX VOLT:4.9V
To confi gure the "Top" and/or "Centr" timer, use the
selection keys on the left or right touch pad to access
the menu option »Timers (general)« in the Multi-
function menu:
selection keys on the left or right touch pad to access
the menu option »Timers (general)« in the Multi-
function menu:
Control adjust
Dual Rate / Expo
Channel 1 cur ve
Switch display
Control switch
Logical switch
Phase settings
Phase assignment
Phase trim
Non-delayed chan
Timers (general)
Fl. phase timers
Ser vo adjustment
Stick mode
Control adjust
Dual Rate / Expo
Channel 1 cur ve
Switch display
Control switch
Logical switch
Phase settings
Phase assignment
Non-delayed chan
Timers (general)
Open this menu option with a tap on the center
SET
key of the right touch pad.
Model time
Batt. time
Top :Stop watch
Centr :Flight tim
Timer
–––
12:34h
1:23h
0:00
0:00
0s
0s
–––
–––
CLR
" Model time"
This timer shows the currently registered total
access time to the currently active model memory
location. If necessary, this automatic time acquisition
can also be infl uenced by assigning an on/off
switch to this "Model time" timer in the rightmost
column labeled with the switch symbol. This timer
can then be switched on and off as desired. This
switch is assigned (and erased again as required)
as described in the section "Assigning transmitter
controls, switches and control switches" on page 56.
A simultaneous tap on the
access time to the currently active model memory
location. If necessary, this automatic time acquisition
can also be infl uenced by assigning an on/off
switch to this "Model time" timer in the rightmost
column labeled with the switch symbol. This timer
can then be switched on and off as desired. This
switch is assigned (and erased again as required)
as described in the section "Assigning transmitter
controls, switches and control switches" on page 56.
A simultaneous tap on the
cd or ef keys of the
right touch pad (CLEAR) will reset the time back to
"0:00 h".
"0:00 h".
" Batt. time"
This operating hours timer records the transmitter's
total switch-on time since the last time the battery
was charged, thus monitoring the transmitter battery.
A switch cannot be assigned to this function.
total switch-on time since the last time the battery
was charged, thus monitoring the transmitter battery.
A switch cannot be assigned to this function.
This timer is automatically reset to "0:00 h" when the
transmitter detects that the voltage of the battery is
signifi cantly higher than the last time it was switched
on, e.g. as a result of a charge process or the
installation of a replacement battery.
A simultaneous tap on the
transmitter detects that the voltage of the battery is
signifi cantly higher than the last time it was switched
on, e.g. as a result of a charge process or the
installation of a replacement battery.
A simultaneous tap on the
cd or ef keys of the
right touch pad (CLEAR) will also reset this time back
to "0:00 h".
to "0:00 h".
"Top" and "Centr"
These two timers are located at the top right of the
basic display (see the screen image immediately to
the left) and can be assigned a different name; their
function and mode of operation varies according to
the name you give them. Independently of the name
each is given, the "Top" and "Centr" timer can be
programmed to run any length of time forwards or
backwards – see further below.
Use the selection keys of the left or right touch pad to
select the line for the "Top" or "Centr" timer.
basic display (see the screen image immediately to
the left) and can be assigned a different name; their
function and mode of operation varies according to
the name you give them. Independently of the name
each is given, the "Top" and "Centr" timer can be
programmed to run any length of time forwards or
backwards – see further below.
Use the selection keys of the left or right touch pad to
select the line for the "Top" or "Centr" timer.
Model time
Batt. time
Timer
–––
12:34h
1:23h
0:00
0:00
0s
0s
–––
–––
Alarm
Timer
Top :
Stop watch
Centr : Flight tim
Now use the selection keys of the left or right touch
pad to select your desired timer and complete your
selection with another tap on the center
pad to select your desired timer and complete your
selection with another tap on the center
SET
key of
the right touch pad:
"Stop watch" or "Motor(run)time"
Both of these two timer variants can be started and
stopped using any of the available switches.
The timer defi ned as "Stopwatch" or "Motor runtime"
sums the "ON" times continually, so that once your
aircraft has landed, you can read off the sum of all
switch "ON" times since the timer was last reset.
Both of these two timer variants can be started and
stopped using any of the available switches.
The timer defi ned as "Stopwatch" or "Motor runtime"
sums the "ON" times continually, so that once your
aircraft has landed, you can read off the sum of all
switch "ON" times since the timer was last reset.