Справочник Пользователя для Graupner GmbH & Co. KG MC-20
23
General operating notices - Face-side connections
Card slot
micro SD and micro SDHC
The
mc-20
HoTT transmitter's card slot for type
micro-SD and micro-SDHC memory cards becomes
accessible once the right face-side cover has been
turned away.
accessible once the right face-side cover has been
turned away.
All conventional micro SD memory cards up to
2 GB and micro SDHC cards up to 32 GB storage
capacity can be used. However, as a manufacturer we
recommend the use of memory cards no larger than
4 GB as this is completely adequate for all normal
situations.
The type of memory card to be used in the transmitter
is that known in conjunction with digital cameras and
cell phones. It is to be pushed into the slot, contacts
up, until it latches, see photos above.
Once the memory card has been inserted, the
transmitter's cover fl ap can be closed again.
The stylized image of a memory card will appear in
the basic setup screen to indicate the presence of the
inserted memory card.
2 GB and micro SDHC cards up to 32 GB storage
capacity can be used. However, as a manufacturer we
recommend the use of memory cards no larger than
4 GB as this is completely adequate for all normal
situations.
The type of memory card to be used in the transmitter
is that known in conjunction with digital cameras and
cell phones. It is to be pushed into the slot, contacts
up, until it latches, see photos above.
Once the memory card has been inserted, the
transmitter's cover fl ap can be closed again.
The stylized image of a memory card will appear in
the basic setup screen to indicate the presence of the
inserted memory card.
#01
0:00h
Stop watch
Flight tim
K78
0:00.0
4.1V
0:00.0
0
0
0
0
0:00h
M
V
RX VOLT 4.8V
Removing the memory card
Press the SC card a bit further into the card slot to
Press the SC card a bit further into the card slot to
The so-called "DATA jack" is located at the right of
this group of connector sockets.
this group of connector sockets.
This jack is intended for connection of the optional
Smart-Box, order no. 33700.
Details about the Smart-Box can be found with the
given product in the Graupner RC main catalog or in
Internet at www.graupner.de.
Smart-Box, order no. 33700.
Details about the Smart-Box can be found with the
given product in the Graupner RC main catalog or in
Internet at www.graupner.de.
Data jack
Connector jack for software updates as well as
for changing date and time from a PC with a
Windows XP, Vista or 7 operating system.
for changing date and time from a PC with a
Windows XP, Vista or 7 operating system.
The USB cable, order no. 32032, which is included
with the set is to be connected to this jack. The
procedure for carrying out a software update via
a PC is described on page 43.
The PC software required, as well as the suitable
USB driver, can be found on the download page for
the given product on the Graupner website at
www.graupner.de.
Once the necessary driver and software is installed
on the PC, this USB connection can be used
to update the transmitter or even just to set the
transmitter's date and time.
To set the transmitter's date and time by way of this
jack, refer to the »Info display« menu, beginning
page 266.
with the set is to be connected to this jack. The
procedure for carrying out a software update via
a PC is described on page 43.
The PC software required, as well as the suitable
USB driver, can be found on the download page for
the given product on the Graupner website at
www.graupner.de.
Once the necessary driver and software is installed
on the PC, this USB connection can be used
to update the transmitter or even just to set the
transmitter's date and time.
To set the transmitter's date and time by way of this
jack, refer to the »Info display« menu, beginning
page 266.
Mini-USB connector