Справочник Пользователя для Graupner GmbH & Co. KG MC-20

242 Detail program description - Telemetry

After selection of the desired menu line with the 

cd

selection keys of the left or right touch pad …

and a subsequent tap on the center 

 key of the 

right touch pad will open the selected sub-menu.

In order to be able to start the voice output through 
the headphone connection, at the very least the 
"REPEAT" line must be assigned to a switch. The 
takes place as described in the section "Switch and 
control switch assignments" on page 56:

Move desired switch
to  ON  position
(ext.  switch:  ENTER)

With this switch you can have the last respective 
voice trigger repeated for the duration of the time 
set to the left of the switch, as long as the assigned 
switch is closed:

With a switch assigned to this line, preferably 
one of the two pushbuttons, switch the selected 
voice messages in rotation on to the next voice 
message for the below-described "TRANSMITTER", 
"RECEIVER" and "SENSOR" options, as described 
below. 

If the "VARIO MODULE" line is activated (

) in the 

»SENSOR SELECT« sub-menu, as described on 
page 240, a switch assigned to one of these lines 
can be used to call up vario-specifi c voice messages 
for the headset connection which are completely 
independent of other voice messages, i.e. voice 
messages triggered by altitude changes, such as the 
message "slowly ascend/descend".

After selection of the desired menu line with the 

cd

selection keys of the left or right touch pad …

and a subsequent tap on the center 

 key of the 

right touch pad will open the selected sub-menu.

Here, after selection of the desired line with the 

cd

selection keys of the left or right touch pad and a 
subsequent tap on the center 

 key of the right 

touch pad, the selected voice message can be 
activated (

) or deactivated (

).

   VOICE TRIGGER