Справочник Пользователя для iBaby Labs Inc. IBB-M3
iBaby Monitor User Manual
Figure 5
Operation Steps:
1) Click “Search (F3)
2) Choose
the
device
3) Change the ip address of the camera according to the information in the red frame
on the left. The numbers in the red circle should not be the same.
4) Put the user name and password into “Authentication” (
By default, the user name
is: admin, password is: 123456
).
5) Click
“Update”
6) After successfully update, click “Search (F3)”, choose the device and click “Browse
(F4)”. Then you may view the camera, like figure 6.
NOTE:
1) If you don’t know how to fill out the content of “IP config”, you could also tick the “Set
IP automatically” to get the IP address from the router automatically.
2) If you have the firewall software in your PC, when you run the BSearch_en.exe, it
may pop up a window to say “whether you want to block this program or not”, then
you should choose not to block.
9