Справочник Пользователя для Guangdong Leetac Electronics Technology Co. Ltd. LEETACE69EA
10
1. Select “CD” mode, then load a CD.
2. While the CD is stopped, press and hold the REPEAT button.
3. “PROGRAM” indicator lights up and “01” blinks on the display.
4. Press (
2. While the CD is stopped, press and hold the REPEAT button.
3. “PROGRAM” indicator lights up and “01” blinks on the display.
4. Press (
or
) to select a track number.
5. Press the REPEAT button again to set the next program track, “02” appears and blinks.
Repeat steps 4 through 5 to program the remaining tracks.
6. When the selection of track numbers has been finished, press the PLAY button (
Repeat steps 4 through 5 to program the remaining tracks.
6. When the selection of track numbers has been finished, press the PLAY button (
) to start program
playback.
(Note: When all 20 program tracks are set, press REPEAT button and “FI”
(Note: When all 20 program tracks are set, press REPEAT button and “FI”
will appear on the display)
7. To cancel the program mode, press the STOP ( ) until the program indicator doesn’t light.
To check the programmed order
In stop mode, press (
To check the programmed order
In stop mode, press (
or
) repeatedly to show the track numbers that have been programmed.
To add a track to the end of the programmed order:
In stop mode, press and hold the REPEAT
button.
Select a track number by pressing (
or
), then press the REPEAT button.
The current track will be added to the end of the program.
Listening to the FM Radio
1. Press the FM button.
2. Tune to the desired station using the Radio Tuner Knob.
Note: In FM Mode, the red “FM ST” indicator lights up when the station reception is in tune.
Adjusting for Best Reception
FM broadcast: Extend and reposition the FM antenna.
Listening to an External Audio Device (AUX Mode)
In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player,
Portable CD Player, etc.)
There is an AUX IN jack on the front of the unit. When connecting a device that has a headphone jack,
use the cable with 3.5mm plugs on either end with the front AUX IN jack.
1. Plug one end of the AUX IN cable (not included) into the AUX IN jack.
Portable CD Player, etc.)
There is an AUX IN jack on the front of the unit. When connecting a device that has a headphone jack,
use the cable with 3.5mm plugs on either end with the front AUX IN jack.
1. Plug one end of the AUX IN cable (not included) into the AUX IN jack.
2. Press the (AUX/ )
button to select AUX function.
3. Plug the other end of the cable into the headphone jack of the external audio source.
NOTE: All operations are only available on your external device.
NOTE: All operations are only available on your external device.
Listening to an External Audio Device (BT Mode)
In BT (Bluetooth) mode, this unit can play music from external devices that have a built-in
Bluetooth feature.
GETTING CONNECTED USING BLUETOOTH
1. Press the (AUX/ )
button twice to select Bluetooth function. The BT indicator will flash blue.