Справочник Пользователя для Rohrback Cosasco Systems ER200
62
Legacy Converter
Once the Transfer Unit has connected to the RDC-CA(T) it will show a screen with the Revision, ID,
Tag Name, Number of Samples collected and the interval in which the samples are taken for the RDC.
Select
Next to see when the last reading was taken and when the next reading will be taken.
Microcor Datalogger/ML-9500B
To use the Transfer Unit with the Microcor Datalogger/ML-9500B, a Legacy Converter must be
connected to the Microcor Datalogger/ML-9500B serial port to allow for communication between
devices.
Create an ID for a Microcor Device
On the Transfer Unit standby screen select
Confg. On the next display screen, select uCor to get to a
list of Microcor devices.
Select the type of Microcor Device.
•
MDL (Microcor Datalogger) – MWT-3905-MDL
•
ML95 (Legacy Microcor Datalogger) – ML-9500B
Enter the desired
ID number then select OK.
Revision: X
ID: XXX TAGNAME
Samples XX ( X m/h)
Next | Back | Exit
Last Read:
MM/DD/YY HH:MM:SS
Next read: HH:MM:SS
Back | Exit
Microcor
M-200 | MDL | ML95
Back
| Exit |
Select Device
ER | LPR | Microcor
Ultracorr 2
| Exit
Enter ID:[ _ ]
(1 – 99)
0123456789.< OK Back