Справочник Пользователя для Moxa UC-7124 UC-7124-CE

Модели

UC-7124-CE

w w w. m o x a . c o m

i n f o @ m o x a . c o m

Embedded Computers

UC-7122/7124 Series

Cirrus Logic EP9302 ARM9 32-bit 200 MHz processor

›

On-board 32 MB RAM, 16 MB flash disk

›

2 or 4 software-selectable RS-232/422/485 serial ports

›

50 bps to 921.6 Kbps baudrate (non-standard baudrates

›

supported)

Dual 10/100 Mbps Ethernet for network redundancy

›

SD socket for storage expansion supported

›

Built-in real-time clock (RTC), buzzer, watchdog timer (WDT)

›

Ready-to-run WinCE 5.0 platform

›

-40 to 75°C wide temperature models available

›

RISC ready-to-run embedded computers with dual LANs,

2 or 4 serial ports, SD, USB

The UC-7122/7124 embedded computers come with 2 or 4 RS-
232/422/485 serial ports and dual 10/100 Mbps Ethernet LAN ports
to provide users with a versatile communication platform, making
these RISC-based embedded computers ideal for your embedded
applications.

The UC-7122/7124 embedded computers use the Cirrus Logic
EP9302 ARM9 200 MHz RISC CPU. Unlike the x86 CPU, which uses
a CISC design, the ARM9’s RISC design architecture and modern
semiconductor technology provide the UC-7122/7124 with a powerful
computing engine and communication functions, but without
generating too much heat. Moreover, the built-in 16 MB NOR Flash
ROM and 32 MB SDRAM give you enough storage capacity to run
applications on the UC-7122/7124 computers. The additional SD
socket provides the flexibility of adding storage expansion disks, and
the dual LAN ports built into the ARM9 make the UC-7122/7124 ideal
communication platforms for simple data acquisition and protocol
conversion applications. In addition, the RS-232/422/485 serial

ports allow you to connect a variety of serial devices. Taken together,
these features ensure that the UC-7122/7124 embedded computers
are convenient and powerful central control units for industrial
applications, such as data acquisition, remote device control and
monitoring, and protocol conversion.

The pre-installed WinCE 5.0 operating system provides a common
Windows-based software operating system for software program
development. This means that software written in Visual C/C++ for
desktop PCs is easily ported to the UC-7122/7124 computers with
a general programming tool such as Microsoft Embedded Visual
C++ or Microsoft Visual Studio 2005. You will not need to spend
time modifying existing software code, and the operating system,
device drivers, and your own software can all be stored in the UC-
7122/7124’s flash memory.

UC-7122

UC-7124

LAN1

RS-232/422/485

Socket Inside

LAN2

UC-7112

Internal SD Slot for
Storage Expansion
(remove cover to access)

Serial Port 1

(RS-232/422/485, DB9 Male)

Ethernet x 2

(10/100 Mbps)

USB 2.0 Host x 1

12 to 48 VDC

RS-232

Console Terminal

Reset Button

Serial Port 2

(RS-232/422/485, DB9 Male)

Ready

RESET

12-48V