Справочник Пользователя для Arcadyan Technology Corporation WN4501FARC
Wireless LAN 802.11b/g Device
17
You are returned to the Wireless Network Connection Properties dialog box.
In order to verify your wireless connection
see section 2.4, Verifying your Wireless Connection.
4.2.2 WPA: Setting the Network Key (Network Security)
Securing your Software Access Point enabled network is essential in a wireless network
environment. Security for the Software Access Point is maintained through the following features:
environment. Security for the Software Access Point is maintained through the following features:
•
Support for WPA (WPA-Personal Security (Wi-Fi protected access) AES and TKIP)
•
Support for the WEP (Wired Equivalency Protocol)
•
Support for MAC address filtering
•
Automatic enabling of MS ICF (Microsoft Internet Connection Firewall).
This section gives instruction on how to correctly set up WPA security on your HP PC. If you are
currently running a WEP enabled device,
skip to Section 2.2.3, WEP: Setting the Network Key
(Network Security).
In order to set up your Network Key (WPA security feature) you will need to do the following:
12. Open the Wireless Network Connection Properties dialog box:
•
Right click on the Wireless Networks icon in the system tray.
•
Select View Available Wireless Networks from the Wireless Networks icon menu.
•
Verify that the wireless network you wish to set up security for is highlighted in the
“Available wireless networks” selection box.
“Available wireless networks” selection box.
•
Select Advanced.
Figure 8: Wireless Network Connection Properties dialog box
13. Select Refresh to the right of the Available networks selection box.