Справочник Пользователя для Arcadyan Technology Corporation WN4501FARC
Wireless LAN 802.11b/g Device
47
Network Bridge mode (
see figure 43
) bridges existing LAN segment(s). Typically a bridge is used
to interconnect LAN segments on a network that already provides DHCP and routing services.
The SoftAP should be configured in Network Bridge mode if the LAN or any LAN segment other
than this HP PC uses DHCP.
The SoftAP should be configured in Network Bridge mode if the LAN or any LAN segment other
than this HP PC uses DHCP.
Figure 44: Mode Switch selections
Auto Scan (
see figure 43)
scans your system by default and locates the best wireless LAN
connections for best network performance.
Mode Switch Options (
see figure 43
) allows three methods for automatically selecting wireless
devices / networks to connect with when you switch between AP Mode and Station Mode or vice
versa:
versa:
•
Prompt for Connection Settings
•
Use Previous Settings if Available
•
AutoScan for Best Available Settings
Selecting “Prompt for Connection Settings” ensures that the settings you have chosen will be the
ones connected with your HP PC. “Use Previous Settings if Available” will cause your HP PC to
attempt connecting to the previously set devices and “AutoScan for Best Available Settings” will
scan for the best configuration.