Справочник Пользователя для Shenzhen Jingwah Information Technology Co. Ltd. CVR155
From here, click ‘Invite User’ under the name of your school. When inviting colleagues, you have a number of user
types to choose from. Most colleagues should be invited as the ‘Teacher’ user type; this gives them the ability to
use all the day-today functions of the ClassVR Portal. IT Technicians and Computing Co-Ordinators should be
invited as the ‘Admin’ user type. Simply enter their email address and click ‘Send Invite’.
types to choose from. Most colleagues should be invited as the ‘Teacher’ user type; this gives them the ability to
use all the day-today functions of the ClassVR Portal. IT Technicians and Computing Co-Ordinators should be
invited as the ‘Admin’ user type. Simply enter their email address and click ‘Send Invite’.
3: Connect your headsets to your school’s Wi-Fi network
Your ClassVR headsets have been pre-loaded with some VR experiences and can be used straight away. However,
in order to control the headsets, you will need to connect them to your school’s Wi-Fi network.
in order to control the headsets, you will need to connect them to your school’s Wi-Fi network.
Create QRKeys
Visit www.portal.classvr.com and make sure you have logged in. Click Admin at the top right of the screen.
On the admin page, look for the Network section and click Connect Device:
On the admin page, look for the Network section and click Connect Device:
This tool will generate a QRKey that you can scan with each ClassVR headset. Follow the steps below:
1.
Select the correct network type.
2.
Enter your school’s SSID (network name). Make sure you enter this exactly as it appears (including spaces and
capital/lowercase letters).
capital/lowercase letters).
3.
Enter the network password.
4.
The system will automatically generate a QRKey (this will not be saved, so you may wish to print the page or
save an image of the QR using a snipping tool).
save an image of the QR using a snipping tool).