Справочник Пользователя для Meru Networks Inc. OAP433E
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential environment. This equipment generates, uses, and
radiates radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference. How- ever, there is no guarantee
that interference will not occur. If this equipment does cause inter- ference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to correct the interference by one of the following
measures:
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential environment. This equipment generates, uses, and
radiates radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference. How- ever, there is no guarantee
that interference will not occur. If this equipment does cause inter- ference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to correct the interference by one of the following
measures:
Reorient or relocate the receiving antenna.
Increase separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from which the receiver is
connected.
connected.
Consult the dealer or an experienced radio/TV technician.
Note
The Part 15 radio device operates on a non-interference basis with other devices
operating at this frequency when using the integrated antennas. Any changes or
modification to the product not expressly approved by Meru could void the user's
authority to operate this device.
operating at this frequency when using the integrated antennas. Any changes or
modification to the product not expressly approved by Meru could void the user's
authority to operate this device.
7.3
Declaration of Conformity, Industry Canada
This equipment is in compliance with the essential requirements of other relevant
provisions of Directive.
provisions of Directive.
7.3.1
Manufacturer Information
Meru Networks, Inc
894 Ross Drive, Sunnyvale, CA 94089, USA
7.3.2
Declaration of Conformity
The Class B digital portion of this apparatus complies with Canadian standard
ICES-003. These devices comply with RSS210 of Industry Canada.
ICES-003. These devices comply with RSS210 of Industry Canada.
La partie numérique de Classe B de cet appareil est conforme à la norme ICES-
003 canadien. Ces appareils sont conformes à la norme RSS 210 d'Industrie
Canada..
003 canadien. Ces appareils sont conformes à la norme RSS 210 d'Industrie
Canada..
Per RSS 210 A9.5 point 7:
The device for the band 5150-5250 MHz is only for indoor usage to reduce
potential for harmful interference to co-channel mobile satellite systems (The
device for the band 5150-5250 MHz is only for indoor usage to reduce potential for
harmful interference to co-channel mobile satellite systems)
potential for harmful interference to co-channel mobile satellite systems (The
device for the band 5150-5250 MHz is only for indoor usage to reduce potential for
harmful interference to co-channel mobile satellite systems)
The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz
and 5470-5725 MHz) to comply with the EIRP limit; and the maximum antenna
gain permitted (for devices in the band 5725-5825 MHz) to comply with the EIRP
limits specified for point-to-point and non point-to-point operation as appropriate,
as stated in section A9.2(3) (The maximum antenna gain permitted (for devices in
the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the EIRPlimit; and
the maximum antenna gain permitted (for devices in the band 5725-5825 MHz) to
comply with the EIRP limits specified for point-to-point and non point-to-point
operation as appropriate, as stated in section A9.2(3).
and 5470-5725 MHz) to comply with the EIRP limit; and the maximum antenna
gain permitted (for devices in the band 5725-5825 MHz) to comply with the EIRP
limits specified for point-to-point and non point-to-point operation as appropriate,
as stated in section A9.2(3) (The maximum antenna gain permitted (for devices in
the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the EIRPlimit; and
the maximum antenna gain permitted (for devices in the band 5725-5825 MHz) to
comply with the EIRP limits specified for point-to-point and non point-to-point
operation as appropriate, as stated in section A9.2(3).
In addition, users should also be cautioned to take note that high-power radars are
allocated as primary users (meaning they have priority) of the bands 5250-5350
MHz and 5650-5850 MHz and these radars could cause interference and/or
damage to WLAN devices (En outre, les utilisateurs doivent également être avertis
de prendre note que les radars à haute puissance sont désignés comme
utilisateurs principaux (ils ont la priorité) des bandes 5250-5350 MHz et 5650-
5850 MHz et ces radars pourraient cause des interférences et / ou endommager
allocated as primary users (meaning they have priority) of the bands 5250-5350
MHz and 5650-5850 MHz and these radars could cause interference and/or
damage to WLAN devices (En outre, les utilisateurs doivent également être avertis
de prendre note que les radars à haute puissance sont désignés comme
utilisateurs principaux (ils ont la priorité) des bandes 5250-5350 MHz et 5650-
5850 MHz et ces radars pourraient cause des interférences et / ou endommager