Справочник Пользователя для Think Outside XTBT01
16. To determine the version of the Bluetooth stack
installed on your handheld device, locate the
Bluetooth icon and tap it with the stylus to open
the application. Find the Bluetooth About tab and
tap to open the associated page. There you will
find the version and build for the installed
Bluetooth stack.
Bluetooth icon and tap it with the stylus to open
the application. Find the Bluetooth About tab and
tap to open the associated page. There you will
find the version and build for the installed
Bluetooth stack.
17. If more than one Bluetooth stack is found on the
Pocket PC device when Setup is tapped, the
keyboard application will display a Stack Selection
dialog box. If the device has a built-in Bluetooth
system, that stack should be used (e.g. Widcomm
BTW-CE). If the device is using a removable
Bluetooth card such as an SDIO card, a different
stack may need to be used (e.g. Socket or
Microsoft). If the wrong stack is selected a
connection may not be possible. In such a case
return to the Stack Selection dialog box by tapping
Enable
keyboard application will display a Stack Selection
dialog box. If the device has a built-in Bluetooth
system, that stack should be used (e.g. Widcomm
BTW-CE). If the device is using a removable
Bluetooth card such as an SDIO card, a different
stack may need to be used (e.g. Socket or
Microsoft). If the wrong stack is selected a
connection may not be possible. In such a case
return to the Stack Selection dialog box by tapping
Enable
on the Config page, then select Axim
wireless keyboard
and tap Setup.
18.
If the keyboard driver fails to detect any
supported Bluetooth stack during the initial setup
or at a later time (e.g. after power on), it will
display the Bluetooth system not detected
message on the BT page. This should not
happen on Pocket PC devices with a built-in
Widcomm stack version 1.4x, since it is always
present and is supported by the keyboard
software. However, if the device has been
upgraded with an incompatible version of the
stack, then this message may be displayed or the
software may function improperly. In such a case
the keyboard software must be replaced with an
updated version.
or at a later time (e.g. after power on), it will
display the Bluetooth system not detected
message on the BT page. This should not
happen on Pocket PC devices with a built-in
Widcomm stack version 1.4x, since it is always
present and is supported by the keyboard
software. However, if the device has been
upgraded with an incompatible version of the
stack, then this message may be displayed or the
software may function improperly. In such a case
the keyboard software must be replaced with an
updated version.
Axim Wireless Keyboard Owner’s Manual Page 9