Справочник Пользователя для Ruckus Wireless VF7XX1

Ruckus Wireless MediaFlex 7811 Access Point

37

4. Type the MAC address in the spaces provided.

5. Click the Update button to save your changes. Assuming all parameters you entered are acceptable, that value 

will be added to the table. 

6. If you have additional MAC addresses you want included, click Add new entry and repeat these steps until 

you've entered all the stations you want. There is a limit of 128 rows.

The Access Control Table contains the following columns:

•

Address: six text boxes appear in which you enter the desired MAC address, in hexadecimal digit form, 
two characters in each box. You can specify a full 12-hex-digit MAC address or enter "wildcard" 
characters for "don't care" digits. Allowable hex-digit characters are 0-9, a-f, and A-F. Most address-tags 
and software where you find MAC addresses listed include colons or dashes to separate the address-pairs; 
that is provided for you on the Web page, so do not enter the colons or dashes. The wildcard characters 
are "x", "X" and blank (space character). Wildcards are useful when you want to specify all MAC 
addresses from a given manufacturer. Thus for example, by specifying only the Organizationally Unique 
Identifier (the first six hexadecimal digits of any MAC address from that manufacturer is its OUI) saves 
you having to enter all 24 million of them (the table size is limited in the AP/Router to 128 entries). Some 
manufacturers produce devices using more than one OUI, in which case you may need to enter each 
applicable one.

•

Remove: Check the 'Remove' box for any row(s) you no longer want used.