Справочник Пользователя для StationZ Co. Ltd. MMZ-300
2
3
1
-
+
1. Re-charging the product with PC
1) Connect the product to the PC as shown in (Picture 1.)
2) Once the connection has been established your product will
begin charging. If the battery is completely drained, it will take
3 hours to fully charge the product again.
2) Once the connection has been established your product will
begin charging. If the battery is completely drained, it will take
3 hours to fully charge the product again.
When to charge
Recharge the product when the built-in LED light flashes red
while in operation. This is the low battery indicator.
Charging level indicator
When your product is completely charged the built-in LED light will
change from red to white.
Problems charging
If the built-in LED light flashes blue while attempting to re-charge,
simply disconnect the product, and wait a few moments before
re-connecting the player again. If this issue persists call for service.
* Your product will not be fully charged at the time of purchase,
please charge it fully before use for best performance.
please charge it fully before use for best performance.
1) Connect the included conversion jack to the headphone jack of
the product
2) Connect the end of the DC wall adaptor to the conversion jack
inserted into the product
3) Connect the DC wall adapter to an electrical outlet.
the product
2) Connect the end of the DC wall adaptor to the conversion jack
inserted into the product
3) Connect the DC wall adapter to an electrical outlet.
* Caution : Do not forget to check the DC wall adapter's polarity.
Use of opposite polarity may cause damage to the product.
Use of opposite polarity may cause damage to the product.
Charging
Adapter's polarity
2. Charging the product with the optional 4.5~5V
DC adapter
DC adapter
(Picture 4.)