Справочник Пользователя для Appro Technology Inc RF1

4.5 TCP/IP configuration setting

Click Start > Control Panel > Network Connections.

Select Internet Protocol (TCP/IP), and then click Properties.

Before processing the IP camera installation in a WAN, please make sure the Internet

connection works properly. If not, please contact your ISP provider.

If you are using a DHCP server, please select Obtain an IP address automatically. Any

assigned IP address for the connected IP cameras must be in the same class type as the server.

If there is no DHCP server, please select specify an IP address enter the IP address, subnet

mask and default gateway of your choosing of your PC. This IP address must be different from

other network IP devices but in the same class type.

NOTE: The IP address of an IP camera in a network must be unique to itself as opposed

to those of the other chosen PCs, but in the same class type.