Справочник Пользователя для Appro Technology Inc RF1

seconds when an event is triggered. 

5. 

Click on “Submit” to save or click on “Don’t Submit” to go back to the Event main page. 

(1) Click 

Add under the Event column on Event Settings page to open the Event setting page. 

On this page, you can arrange three parts –Trigger, Event Schedule, and Action to set an 

event. A total of 3 event settings can be configured. 

(2) 

Enter the Event Name for the event setting. 

(3) 

Select “Enable this event” option to enable the event setting.  

(4) 

Set the event priority from: “normal”, “high” and “highest”. Events with a higher priority will 

be executed first. 

(5) 

Enter the duration in seconds to pause motion detection after a motion is detected (for the 

trigger types - motion detection and digital input – use only). 

(6) 

An event is an action initiated by a user-defined trigger source; it is the causal 

arrangement of the following three parts: Trigger, Event Schedule, and Action. Set the 

event details of each part. 

 

Trigger: This option defines when to trigger the IP camera. The trigger source can 

be configured to use the IP camera’s built-in motion detection mechanism, periodic, 

external digital input devices or system boot. There are several choices of trigger 

sources as shown below.  

(a) 

Video motion detection: This option makes use of the built-in motion 

detection mechanism as a trigger source. To enable this function, you need 

to configure a motion detection windows first. 

(b) 

Periodic: This option allows the IP camera to trigger periodically for every 

other defined minute(s). UP to 99999 minutes. 

(c) 

Digital input: This option allows the IP camera to use an external digital input 

device or sensor as a trigger source. Depending on your application, there 

 

70