Справочник Пользователя для myon AG M320-1
Low signal strength at the receiver can be caused by poor positioning of the receiver as well as
interference from other sources of radio waves such as mobile/cordless phones or an active
microwave oven. Please read the next sections carefully and follow the recommendations to achieve
optimum range of the system.
interference from other sources of radio waves such as mobile/cordless phones or an active
microwave oven. Please read the next sections carefully and follow the recommendations to achieve
optimum range of the system.
5.7.1
Receiver
•
An elevated position may be advantageous.
•
The receiver should be positioned with a free line of sight to the measurement area.
•
As far as possible, try to position the receiver centrally in the measurement volume.
•
As far as possible, avoid using other signal emitting devices such as wireless phones and
microwave ovens in the measurement volume.
microwave ovens in the measurement volume.
•
Depending on the room's geometry, small changes in the receiver's position may have a large
impact on the transmission range; if the range is insufficient, try to reposition the receiver.
impact on the transmission range; if the range is insufficient, try to reposition the receiver.
5.7.2
Transmitter
•
Optimum placement of the transmitter improves the range; the transmitter is designed so
that the signal is focussed towards its top hemisphere.
that the signal is focussed towards its top hemisphere.
•
As a rule of thumb, the transmitters should be positioned as much lateral on the body as
possible and ideally within a line of sight with the receiver.
possible and ideally within a line of sight with the receiver.
Date: 03.06.2013
LaInMa-EU-m320 - Instructions manual (full version, english) - 20130603 - V1.7.odt
Page 21 of 32