Справочник Пользователя для myon AG M320-1
2
2
2
2 Preface
Preface
Preface
Preface
2.1
2.1
2.1
2.1 Intended purpose
Intended purpose
Intended purpose
Intended purpose
The myon320 system is designed to capture and wirelessly transmit EMG sensor signals recorded
from human muscles. The myon320 can not be used for electrical stimulation of muscles.
from human muscles. The myon320 can not be used for electrical stimulation of muscles.
A number of other sensors for the recording of different biophysical signals in human movement
such as accelerations, forces, temperatures, pressures may also be available from the manufacturer
upon request.
such as accelerations, forces, temperatures, pressures may also be available from the manufacturer
upon request.
All product models and types of the product may only be used externally and non-invasively by
professional users (e.g. healthcare professionals, doctors, researchers, etc.). Only the components
(sensors, power supply, etc.) supplied by the manufacturer are to be used. Additional sensors or
spare parts are available upon request from the manufacturer.
professional users (e.g. healthcare professionals, doctors, researchers, etc.). Only the components
(sensors, power supply, etc.) supplied by the manufacturer are to be used. Additional sensors or
spare parts are available upon request from the manufacturer.
2.1.1
Transmitters and Sensors
The transmitters are intended to record a signal from a pair of electrodes. Other signal types can
also be recorded by different transmitters. Some signal types do not require a cable to be attached
to the transmitter. The recorded signal is immediately digitized and transmitted to the receiver.
also be recorded by different transmitters. Some signal types do not require a cable to be attached
to the transmitter. The recorded signal is immediately digitized and transmitted to the receiver.
Information about the available sensor types can be requested from your local sales agent.
2.1.2
Receivers
The receivers are intended to receive the sensor data from the transmitter and to output the
received data via an analogue or digital output interface for further use with 3rd party hardware
systems and/or software.
received data via an analogue or digital output interface for further use with 3rd party hardware
systems and/or software.
2.1.3
Charging Cradles
The charging cradle is used to re-charge the transmitter batteries. It is also intended as a place in
which to safely store the transmitters when they are not in use.
which to safely store the transmitters when they are not in use.
2.2
2.2
2.2
2.2 Contraindications
Contraindications
Contraindications
Contraindications
Contraindications that relate directly to the product, are currently unknown. The medical practitioner
and/or user has to decide on the basis of the general condition of the patient or subject whether or
not the intended application is reasonable. Further information is accessible in current literature.
and/or user has to decide on the basis of the general condition of the patient or subject whether or
not the intended application is reasonable. Further information is accessible in current literature.
Not for use in an operating theatre, anesthetic gas or oxygen-rich environments. Not for use where
there is a risk of compromising the essential performance of medical electrical equipment. Not
suitable for use in high magnetic flux, ionizing radiation, sterile, or life- or safety-critical
environments. The device is not suitable for unattended continuous operation.
there is a risk of compromising the essential performance of medical electrical equipment. Not
suitable for use in high magnetic flux, ionizing radiation, sterile, or life- or safety-critical
environments. The device is not suitable for unattended continuous operation.
Date: 03.06.2013
LaInMa-EU-m320 - Instructions manual (full version, english) - 20130603 - V1.7.odt
Page 9 of 32