Справочник Пользователя для EnOcean GmbH STM300C
USER MANUAL V0.82
© 2010 EnOcean | www.enocean.com
TCM 300 / 300C / 320 / 320C User Manual V0.82 | Page 24/43
TCM 300 / 300C / 320 / 320C
Isolation material may brake at temperatures below -15 °C.
Please take care to fix the antenna cable in case vibrations are expected.
Please take care to fix the antenna cable in case vibrations are expected.
3.3.2 Mounting 50 Ω antennas
For mounting the receiver at bad RF locations (e.g. within a metal cabinet), an external 50
Ω antenna may be connected. The whip antenna must be removed in this case!
For mounting the receiver at bad RF locations (e.g. within a metal cabinet), an external 50
Ω antenna may be connected. The whip antenna must be removed in this case!
TCM 320 / 320C provide soldering pads for an SMA connector, e.g. from Tyco Electronics:
Modification procedure:
TCM320: Remove whip antenna and mount SMA connector
TCM320C: Remove whip antenna and 12pF capacitor. Then mount SMA connector
For 315 MHz modules (TCM 300C and TCM 320C) please note that a full approval
is needed if modules are used with external antennas.
is needed if modules are used with external antennas.
When using the SMA connector pads please make sure no mechanical forces are
exerted on the 16-pin connector! It is recommended to use a strain relief for that
purpose.
purpose.
50Ω
GND
GND
GND
GND
X
remove
TCM320C:
X
remove