Справочник Пользователя для EnOcean GmbH TCM2XXC
USER MANUAL
V0.92
EnOcean GmbH
Kolpingring 18a
82041 Oberhaching
Germany
Kolpingring 18a
82041 Oberhaching
Germany
Phone +49.89.67 34 689-0
Fax +49.89.67
Fax +49.89.67
34
689-50
info@enocean.com
www.enocean.com
www.enocean.com
Subject to modifications
TCM200C / 220C User Manual V0.92
June 5, 2008 5:18 PM
Page 18/24
TCM200C / 220C User Manual V0.92
June 5, 2008 5:18 PM
Page 18/24
TCM200C / 220C
OEM Requirements
In order to use EnOcean’s FCC ID number, the OEM must ensure that the following condi-
In order to use EnOcean’s FCC ID number, the OEM must ensure that the following condi-
tions are met:
End users of products, which contain the module must not have the ability to alter the
firmware that governs the operation of the module. The agency grant is valid only when
firmware that governs the operation of the module. The agency grant is valid only when
the module is incorporated into a final product by OEM integrators.
The end-user must not be provided with instructions to remove, adjust or install the
module.
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling require-
ments are met. This includes a clearly visible label on the outside of the final product.
ments are met. This includes a clearly visible label on the outside of the final product.
Attaching a label to a removable portion of the final product, such as a battery cover, is
not permitted. The label must include the following text:
not permitted. The label must include the following text:
Contains FCC ID: SZV-TCM2XXC
The enclosed device complies with Part 15 of the FCC Rules. Operation is
The enclosed device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (i.) this device may not cause
harmful interference and (ii.) this device must accept any interference re-
harmful interference and (ii.) this device must accept any interference re-
ceived, including interference that may cause undesired operation.
The user manual for the end product must also contain the text given above.
Changes or modifications not expressly approved by EnOcean could void the user's au-
thority to operate the equipment.
thority to operate the equipment.
The module must be used with only the following approved antenna(s).
The OEM must sign the OEM Limited Modular Approval Agreement with EnOcean
3.6.2 IC (Industry Canada) Certification
Labeling requirements for Industry Canada are similar to those required by the FCC. The
Original Equipment Manufacturer (OEM) must ensure that IC labeling requirements are
met. A clearly visible label on the outside of a non-removable part of the final product must
Original Equipment Manufacturer (OEM) must ensure that IC labeling requirements are
met. A clearly visible label on the outside of a non-removable part of the final product must
include the following text:
Contains IC: 5731A-TCM2XXC
Part Number Type
Gain
N.A.
Integrated Wire/Monopole
1.0 dBi