Справочник Пользователя для L-3 Communications Aydin Corporation 6000-8501900
P
AGE
8 • GSM T
ERMINAL
U
SER
G
UIDE
Ring Back Test -
• On any telephone connected to the Terminal,
dial #*26 and wait for confirmation tone.
• Hang up. All connected telephones should
start ringing. (If some connected telephones do
not ring check your wiring to ensure that all
devices are connected properly).
• End the Ring Back Test by lifting any
connected telephone and hanging it up.
i If you have a Caller ID device attached
to the Terminal, you should see the number
“1234567890” appear during the Ring Back Test
9. Mounting the GSM Terminal on a wall
Refer to the figure below for wall mounting.
1
2
3
Figure 12. Wall mounting
1. Fasten the supplied wall-mounting bracket onto
the wall.
2. Press Terminal flat against wall.
3. Slide Terminal down onto the bracket
3. Slide Terminal down onto the bracket