Справочник Пользователя для Building Automation Products Inc. 060811TEMP
750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel: +1-608-735-4800 • Fax: +1-608-735-4804 • E-mail:sales@bapihvac.com • www.bapihvac.com
Building Automation Products, Inc.
Upgrade to BAPI. 100% Compatible. Guaranteed.
Sensors for HVAC/R — Temperature • Humidity • Pressure • Air Quality
FCC ID: T4F060811TEMP
Installation and Operation Instructions for the Wireless Temperature Sensor.
Installation and Operation Instructions for the Wireless Temperature Sensor.
Building Automation Products, Inc.
Wireless Temperature Sensor
Installation and Operation Instructions
Description
The Building Automation Products, Inc. Wireless Temperature Sensor, Model BA/WT-D-BB is a battery
operated, surface mounted sensor with a 418 MHz radio transmitter.
The BA/WT-D-BB is designed to require very little energy; the two internal 3.6 Volt Lithium batteries will
operate the sensor for 5 to 8 years in normal operation
The BA/WT-D-BB enclosure is designed to mount directly onto a ventilation duct surface or outside wall with
the sensing probe being mounted out the back [duct] or out the bottom [outdoor]. The enclosure is supplied
with a ‘foam-back’ to minimize vibration and air leakage from a duct or electrical conduit. The enclosure is
also provided with additional screws to lock the cover and base together to prevent tampering.
The BA/WT-D-BB has one internal push-button which allows for easy training and identification of the
transmitter. The push-button is used when linking the transmitter to any Analog Output Module. See BAPI’s
INS/OPS for details. The BA/WT-D-BB also has an internally mounted LED. The LED will flash briefly when
the sensor transmits a data packet using the 418 MHz radio. This happens roughly about once every 10 seconds
or shortly after the use of the push-button.