Справочник Пользователя для TP-Link Technologies Co. Ltd. C5400

68

Chapter 11

VPN Server

In the OpenVPN connection, the home network can act as a server, and the remote 
client can access the server through the router which acts as an OpenVPN Server 
gateway. To use the VPN feature, you should enable OpenVPN Server on your router, 
and install and run VPN client software on the remote client. Please follow the steps 
below to set up an OpenVPN connection.

1. Visit 

, and log in with the username and password you‘ve set for 

the router.

2. Go to 

Advanced

 > 

VPN Server

 > 

OpenVPN

. And then Select 

Enable VPN Server

.

1.  Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a 

static IP address for router’s WAN port and synchronize your System Time with Internet.

2.  The first time you configure the OpenVPN Server, you may need to 

Generate

 a certificate before you enable the 

VPN Server.

3. Select the 

Servive Type

 (communication protocol) for OpenVPN Server: UDP, TCP.

4. Enter a VPN 

Service Port

 to which a VPN client connects, and the port number should 

be between 1024 and 65535.

If you have configured NAT Settings, please make sure the 

Service Port number

 is not the same as the external port 

of NAT Settings.

5. In 

VPN Subnet/Netmask

 field, enter the range of IP addresses that can be leased to 

the client by the OpenVPN server.