Справочник Пользователя для TP-Link Technologies Co. Ltd. WR64XGV0

 

 38

 

Figure 5-20  DHCP Settings 

¾

  DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must 

have another DHCP server within your network or else you must manually configure the 

computer. 

¾

  Start IP Address - This field specifies the first of the addresses in the IP address pool. 

192.168.1.100 is the default start address. 

¾

  End IP Address - This field specifies the last of the addresses in the IP address pool. 

192.168.1.199 is the default end address. 

¾

  Address Lease Time - The Address Lease Time is the amount of time in which a network 

user will be allowed connection to the router with their current dynamic IP Address. Enter the 

amount of time, in minutes. The user will be "leased" this dynamic IP Address. The range of 

the time is 1 ~ 2880 minutes. The default value is 120 minutes. 

¾

  Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the router, 

default value is 192.168.1.1 

¾

  Default Domain - (Optional.) Input the domain name of your network. 

¾

  Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your 

ISP. 

¾

  Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP 

provides two DNS servers. 

) 

To use the DHCP server function of the router, you must configure all computers on the LAN as 

"Obtain an IP Address automatically" mode. This function will take effect until the router reboots. 

This page shows Client Name, MAC Address, Assigned IP, and Lease Time for each DHCP 

Client attached to the router (Figure 5-21):