Справочник Пользователя для Datastrip Inc. DSV2SC01
DSV2+
Turbo
User Manual, Version 1.09
10
Copyright © 2006 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
4.4 I/O Port Access
The top rubber end cap on the DSV2+ snaps open to reveal the I/O ports. To open the top rubber
end cap pull up from the back edge using the two finger indents. The rubber cap is tethered at
two points to prevent it from being lost or misplaced. To reattach the cover, simply press the
cover into place.
end cap pull up from the back edge using the two finger indents. The rubber cap is tethered at
two points to prevent it from being lost or misplaced. To reattach the cover, simply press the
cover into place.
Shown here is the I/O connector panel located on the top of the unit, which includes a 10/100
base-T LAN port, two USB-2.0 host ports, one mini-USB client port, and one external Compact
Flash slot.
base-T LAN port, two USB-2.0 host ports, one mini-USB client port, and one external Compact
Flash slot.
4.4.1
External Compact Flash Slot
The DSV2+ has one externally accessible Type-I/II Compact Flash slot. It is compatible with
“ATA-Flash” storage cards, NE-2000-compatible network adapters, and various modem and
serial interface devices.
4.4.2
“ATA-Flash” storage cards, NE-2000-compatible network adapters, and various modem and
serial interface devices.
4.4.2
USB Ports
The DSV2+ supplies two standard USB ports (Ver-2.0), compatible with either low-speed (1.5
Mbps) or full-speed (12 Mbps) devices. These are “host” type ports, compatible with peripheral
devices only (keyboard, mouse, etc.). DO NOT connect this host ports directly to other USB
host devices such as a PC, for these type applications use the mini USB client port (Ver-2.0).
4.4.3
Mbps) or full-speed (12 Mbps) devices. These are “host” type ports, compatible with peripheral
devices only (keyboard, mouse, etc.). DO NOT connect this host ports directly to other USB
host devices such as a PC, for these type applications use the mini USB client port (Ver-2.0).
4.4.3
10/100 LAN Ethernet Port
The DSV2+ features an Ethernet LAN port, compatible with 10/100baseT networking standards.
The mating connector is a standard RJ-45. The LAN connector has two integrated LED
indicators: Green for “link activity” and Yellow for “link present”.
4.4.4
The mating connector is a standard RJ-45. The LAN connector has two integrated LED
indicators: Green for “link activity” and Yellow for “link present”.
4.4.4
Smart Card Slot
The DSV2+ has an integrated Smart Card reader. It is compatible with
Contact-type Smart Cards (ISO 7816, 8-contact style). Cards need to
be inserted with the contacts facing UP (towards the LCD display).
Contact-type Smart Cards (ISO 7816, 8-contact style). Cards need to
be inserted with the contacts facing UP (towards the LCD display).
In addition, there is an integrated Contactless
Smart Card transceiver and antenna. The
antenna is positioned in a plane perpendicular
to the LCD screen, on the same side of the
unit as the Smart Card slot. The typical
maximum operating range is 30 mm.
Smart Card transceiver and antenna. The
antenna is positioned in a plane perpendicular
to the LCD screen, on the same side of the
unit as the Smart Card slot. The typical
maximum operating range is 30 mm.
USB Client Port
USB Host Ports