Справочник Пользователя для Gasngo R&D Ltd. RDR008
32
Chapter 3 – Station Installation Manual
OPW 11AVI and OPW 12 VW
1. Tighten
the stripes not closer than 5 mm from the connector so it will be firmly on the
white strip.
2. Place the Reader into the Insulator’s front part.
3. Ensure that the caption "front side" faces towards the vehicle.
4. Ensure that the two protrusions in the front of the Reader fit exactly into the Insulator.
5.
Ensure that the Reader’s battery wire extends backwards into the direction of the
battery’s pouch.
6. Insert the battery into the battery’s pouch inside the Insulator.
Figure 11: Battery inside the Pouch
Opening the connector
Although the connector is extremely robust in field, it has to be handled with extreme caution
when opening it.
Carefully follow the instruction below.