Справочник Пользователя для Gasngo R&D Ltd. RDR008
37
Chapter 3 – Station Installation Manual
Notes:
Reader8 must be installed on a nozzle with its original insulator.
The battery for Reader8 is provided separately from the Reader.
The list in Table 5 above includes nozzle models that were tested with Reader8.
The Reader may fit other nozzle types as well.
The nozzles marked with * will only fit short grip.
Other nozzles stated as short can be installed with long grip as well.
Figure 18: Reader8 Installation Parts and Tools
Note: Reader8 installation section shows the short grip, but instructions are the same
for the long grip.
for the long grip.
1
4
2
3
5
6