Справочник Пользователя для Instrumentarium Dental PaloDEx Group Oy SM
2 Capturing intraoral images
200150 rev 3
Instrumentarium Dental
15
2.5
S
HARING
SENSOR
WITH
OTHER
USERS
It is assumed here that two or more workstations in different rooms
have been configured to operate in the same Sigma M network.
have been configured to operate in the same Sigma M network.
It is possible to use default sensor assignment for each room or
alternatively select the sensor to be used from a list of available
sensors in each image capture session. Select "Use preselected
sensors" from Tools - Intra - Sigma M settings -menu to use default
sensor assignment. See Sigma installation manual and user manual
for details.
alternatively select the sensor to be used from a list of available
sensors in each image capture session. Select "Use preselected
sensors" from Tools - Intra - Sigma M settings -menu to use default
sensor assignment. See Sigma installation manual and user manual
for details.
NOTE!
Several rooms can select one shared sensor as their default sensor
device. The sensor allows only one user at a time. If the sensor has
been previously used by someone else, the user is asked to confirm
selection when activated to avoid unintentional connection to the
sensor.
device. The sensor allows only one user at a time. If the sensor has
been previously used by someone else, the user is asked to confirm
selection when activated to avoid unintentional connection to the
sensor.
1
Start CliniView software and select a patient.
2
Switch on the sensors to be used by pressing the sensor power
switch.
switch.
3
Protect the sensor with a hygienic cover and place the sensor on
to the holder.
to the holder.
4
Start image capturing in CliniView by pressing
the Start intraoral image capturing button of
the appropriate sensor.
the Start intraoral image capturing button of
the appropriate sensor.
5
If default sensor assignment -mode is not used,
select the desired sensor from the Select device dialogue that
opens. If the sensor has been transferred from one room to
another, the user will be notified that the sensor was previously
assigned to another workstation.
select the desired sensor from the Select device dialogue that
opens. If the sensor has been transferred from one room to
another, the user will be notified that the sensor was previously
assigned to another workstation.
6
Position the sensor in the patient´s mouth. The sensor unit can be
either on patient’s chest or with the magnetic mounting on the
side of the x-ray unit tube head. Position the Intraoral x-ray unit as
appropriate.
either on patient’s chest or with the magnetic mounting on the
side of the x-ray unit tube head. Position the Intraoral x-ray unit as
appropriate.
POWER
SWITCH
SWITCH
2 Capturing intraoral images
200150 rev 3
Instrumentarium Dental
15
2.5
S
HARING
SENSOR
WITH
OTHER
USERS
It is assumed here that two or more workstations in different rooms
have been configured to operate in the same Sigma M network.
have been configured to operate in the same Sigma M network.
It is possible to use default sensor assignment for each room or
alternatively select the sensor to be used from a list of available
sensors in each image capture session. Select "Use preselected
sensors" from Tools - Intra - Sigma M settings -menu to use default
sensor assignment. See Sigma installation manual and user manual
for details.
alternatively select the sensor to be used from a list of available
sensors in each image capture session. Select "Use preselected
sensors" from Tools - Intra - Sigma M settings -menu to use default
sensor assignment. See Sigma installation manual and user manual
for details.
NOTE!
Several rooms can select one shared sensor as their default sensor
device. The sensor allows only one user at a time. If the sensor has
been previously used by someone else, the user is asked to confirm
selection when activated to avoid unintentional connection to the
sensor.
device. The sensor allows only one user at a time. If the sensor has
been previously used by someone else, the user is asked to confirm
selection when activated to avoid unintentional connection to the
sensor.
1
Start CliniView software and select a patient.
2
Switch on the sensors to be used by pressing the sensor power
switch.
switch.
3
Protect the sensor with a hygienic cover and place the sensor on
to the holder.
to the holder.
4
Start image capturing in CliniView by pressing
the Start intraoral image capturing button of
the appropriate sensor.
the Start intraoral image capturing button of
the appropriate sensor.
5
If default sensor assignment -mode is not used,
select the desired sensor from the Select device dialogue that
opens. If the sensor has been transferred from one room to
another, the user will be notified that the sensor was previously
assigned to another workstation.
select the desired sensor from the Select device dialogue that
opens. If the sensor has been transferred from one room to
another, the user will be notified that the sensor was previously
assigned to another workstation.
6
Position the sensor in the patient´s mouth. The sensor unit can be
either on patient’s chest or with the magnetic mounting on the
side of the x-ray unit tube head. Position the Intraoral x-ray unit as
appropriate.
either on patient’s chest or with the magnetic mounting on the
side of the x-ray unit tube head. Position the Intraoral x-ray unit as
appropriate.
POWER
SWITCH
SWITCH
Approved
Reviewed: Anttila Mika Johannes 02.05.07 09:54:49
Approved: Levälampi Juhani Eemeli 02.05.07 12:02:32
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 04.05.07 12:38:31
Approved: Levälampi Juhani Eemeli 02.05.07 12:02:32
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 04.05.07 12:38:31