Справочник Пользователя для Mitel Deutschland GmbH 68635RFP36U-01
OMM Web Service
67
•
Proxy server: IP address or name of the SIP proxy server. If a host name and domain are used for
the proxy server parameter, ensure that a DNS server and a domain are specified for your SIP-DECT
system via DHCP or the OM Configurator tool.
system via DHCP or the OM Configurator tool.
•
Proxy port: SIP proxy server’s port number. Default is “5060”. To enable DNS SRV support for proxy
lookups, use a value of “0” for the proxy port. In case that TLS is used, the value shall be changed to
“5061”.
“5061”.
•
Registrar server: IP address or name of the SIP registrar. Enables the DECT phones to be
registered with a registrar. If a host name and domain are used for the proxy server parameter,
ensure that a DNS server and a domain are specified for your SIP-DECT system via DHCP or the OM
Configurator tool.
ensure that a DNS server and a domain are specified for your SIP-DECT system via DHCP or the OM
Configurator tool.
•
Registrar port: SIP registrar’s port number. Default is “5060”. To enable DNS SRV support for
registrar lookups, use a value of “0” for the registrar port. In case that TLS is used, the value shall be
changed to “5061”.
changed to “5061”.
•
Registration period: The requested registration period, in seconds, from the registrar. Default is
“3600”.
•
Globally Routable User Agent (URL): Enables support for Globally Routable User-Agent URIs
(GRUUs). GRUUs provide a way for anyone on the Internet to route a call to a specific instance of a
SIP User-Agent.
SIP User-Agent.
•
Outbound proxy server: This setting is optional. You can enter the address of the outbound proxy
server in this field. All SIP messages originating from the OMM are sent to this server. For example, if
you have a Session Border Controller in your network, then you would normally set its address here.
you have a Session Border Controller in your network, then you would normally set its address here.
•
Outbound proxy port: The proxy port on the proxy server to which the OMM sends all SIP
messages. Default is “5060”. In case that TLS is used, the value shall be changed to “5061”.
•
Transport protocol: The protocol used by the OMM to send/receive SIP signaling. Default is “UDP”.
•
Local UDP/TCP port range: The port range to be used for DECT users when UDP/TCP is used as
the transport protocol. The default is 5060 – 5060.
•
Local TLS port range: The port range to be used for DECT users when TLS is used as the transport
protocol. The default is 5061 – 5061.
There are certain rules to note when configuring port ranges; see section 3.7 for more information.