Справочник Пользователя для MG International 040
Installation and operation guide - 7
5.1 Inserting the batteries
Warning! The black flexible tube is connected to the central unit, and must be handled with care.
-
Remove the cover by unscrewing the 4 screws (Pict. 2)
-
Turn the cover over and locate the battery housing
-
Insert the 4 “C” batteries in the appropriate housing, making sure the polarity is respected (Pict.3)
-
You will hear 15 short beeps. Your device is in OFF mode.
-
Put the cover back in place on the base without tightening the screws.
-
Insert the black flexible tube into the rigid angled tube.
In order to facilitate the installation of the rigid
angled tube on the flexible tube, it is advised to wet the inside of the rigid angled tube by dipping it
briefly in the water of your pool, for example.(Pict. 4)
briefly in the water of your pool, for example.(Pict. 4)
-
Fit the probe on the device, making sure the probe is pointing downwards. (Pict. 5)
Pict. 2
Pict. 3
Pict. 4
Pict. 5