Справочник Пользователя для KING 433RA

Page 5

5. When signal strength appears, stop rotating the antenna.  Use the up, 

down, left and right arrows as necessary to maximize the satellite signal.

6. Press POWER until the remote turns off (approximately 1 second).  The remote turns off

automatically if no buttons are pressed for 90 seconds.

7. Exit the Signal Meter Screen to view your programming.  Enjoy!

You can STORE up to 4 satellite positions using the STORE/RECALL feature.

1. Lock onto a satellite using the procedure for SATELLITE ACQUISITION.

2. Press and hold the 1 button for more than 2.5 seconds.

The number “1” will illuminate and the display will show P1.
(When button is released, display will go back to elevation.)

3. Repeat for up to 3 more satellites using the 2, 3, and 4 buttons.

4. To RECALL a stored position, press the desired button 1, 2, 3, 

or 4 for less than 2.5 seconds.  The corresponding number of the
recalled location will light up while switching, as well as the
switching indicator.  

The antenna will move to the recalled position.

Note:  It may take a few minutes to download programming from the satellite.

If you move the VuQube you will have to re-acquire the satellite.  Follow the directions on page 4-5.

Note:  When recalling a stored position, if you hold the button for more than 2.5 seconds, the current position will be

stored rather than a previous position being recalled.

To cancel moving to a stored position, press any of the arrow buttons.

If you move the VuQube you will have to re-acquire the satellites and store the positions again.  Follow the
instructions on pages 4-5.