Справочник Пользователя для SRT Marine Systems plc 425-0002
Operation
Page 55
into the card socket. Settings previously saved can be restored, thus restoring
the transceiver to a previous configuration. ‘Reset settings’ will restore the unit
to its factory defaults and is protected by the unit password.
the transceiver to a previous configuration. ‘Reset settings’ will restore the unit
to its factory defaults and is protected by the unit password.
4.14 WiFi Feature
The AIS transceiver provides features to operate with vessel WiFi networks,
or to create its own network. Access the WiFi menu through ‘Interfaces’ -> ‘Wi-
Fi settings’.
or to create its own network. Access the WiFi menu through ‘Interfaces’ -> ‘Wi-
Fi settings’.
4.14.1 Client Mode
If client mode is selected, the transceiver will search for available WiFi net-
works to connect to. If one is selected a password may be required, and upon
connection the details of the connection will be shown in the bottom right cor-
ner of the screen. Once a WiFi connection is made, the transceiver will output
a range of NMEA sentences over the selected WiFi port.
If client mode is selected, the transceiver will search for available WiFi net-
works to connect to. If one is selected a password may be required, and upon
connection the details of the connection will be shown in the bottom right cor-
ner of the screen. Once a WiFi connection is made, the transceiver will output
a range of NMEA sentences over the selected WiFi port.
4.14.2 Access Point Mode
If the transceiver is configured as a WiFi access point (AP) it will create its own
WiFi network, allowing other WiFi enabled devices to connect to it. Once con-
nections are made, a range of NMEA sentences will be transmitted from the
transceiver to any connected devices.
If the transceiver is configured as a WiFi access point (AP) it will create its own
WiFi network, allowing other WiFi enabled devices to connect to it. Once con-
nections are made, a range of NMEA sentences will be transmitted from the
transceiver to any connected devices.
4.14.3 Advanced WiFi Features
Within the ‘WiFi’ screen, certain parameters can be changed such as Channel
Number, Protocol, Port, Encryption, etc. These are recommended for ad-
vanced users only.
WiFi is switched off by selecting ‘Disable’ in the ‘Select Operating mode’ box.
Within the ‘WiFi’ screen, certain parameters can be changed such as Channel
Number, Protocol, Port, Encryption, etc. These are recommended for ad-
vanced users only.
WiFi is switched off by selecting ‘Disable’ in the ‘Select Operating mode’ box.