Справочник Пользователя для AIR802 LLC AP-G200
User Name:
The account provided by your ISP
Password:
The password for your account.
Connect Type:
“Continuous “ : connect to ISP permanently
“Manual” : Manual connect/disconnect to ISP
“On-Demand” : Automatically connect to ISP when user needs to
access the Internet.
access the Internet.
Idle Time:
The number of inactivity minutes to disconnect from ISP. This
setting is only available when “Connect on Demand” connection
type is selected.
setting is only available when “Connect on Demand” connection
type is selected.
MTU Size:
Maximum Transmission Unit, 1412 is the default setting, you may
need to change the MTU for optimal performance with your specific
ISP.
need to change the MTU for optimal performance with your specific
ISP.
DNS1~3:
The IP addresses of DNS provided by your ISP.
DNS (
Domain Name Server) is used to map domain names to IP
addresses. DNS maintain central lists of domain name/IP
addresses and map the domain names in your Internet requests to
other servers on the Internet until the specified web site is found.
addresses and map the domain names in your Internet requests to
other servers on the Internet until the specified web site is found.
Clone MAC
Address:
Address:
Clone device MAC address to the specify MAC address required
by your ISP.
by your ISP.
Enable UPnP:
Enable UPnP, this function allows the device to be found and
configured automatically by the system. (Ex. Window XP)
configured automatically by the system. (Ex. Window XP)
PPTP
Point to Point Tunneling Protocol (PPTP) is a service that applies to connections in
Europe only
48