Справочник Пользователя для AIR802 LLC AP25N01
AP25N01 User Manual
48
To add a VLAN ID Tag for VAP2 wireless SSID, in RADIO 1 VLAN click the VAP2 tab,
enter the ID number, select Tag and click Add.
enter the ID number, select Tag and click Add.
To add a VLAN ID Tag for VAP3 wireless SSID, in RADIO 1 VLAN click the VAP3 tab,
enter the ID number, select Tag and click Add.
enter the ID number, select Tag and click Add.
Similarly, to untag a VLAN ID enter the ID number, select Untag and click Add.
WARNING: Adding a VLAN ID Tag to a device interface port can cause loss of
connection to the device web manager if the PC ethernet port or wireless connection do
not have a VLAN ID Tag or do not have the same VLAN ID Tag setup. If this happens,
use the device Reset button to clear the config and reconfigure. See the Reset button
operations section.
connection to the device web manager if the PC ethernet port or wireless connection do
not have a VLAN ID Tag or do not have the same VLAN ID Tag setup. If this happens,
use the device Reset button to clear the config and reconfigure. See the Reset button
operations section.
Refer to Appendix V for VLAN setup examples.
VLAN Management
VLAN management lets you control and limit client connection of same VLAN ID tag
group be open AP device web page.
group be open AP device web page.
NOTE:
1. VLAN Management works only in VLAN tag pass-through mode. i.e., VLAN
Switch is disabled.
2. When the VLAN Switch is enabled or configured, the VLAN Management
function stops operating.
Example:
Assuming there are two VLAN ID groups, 2001 and 2002 set up in the AP device.