Справочник Пользователя для Sagem Securite Groupe SAFRAN MA1XXBC
22
Configuring a networked MorphoAccess®
Figure 3 • 4: MorphoAccess
®
configuration tool
Network Wi-Fi™ configuration
Wi-Fi™ connection is available under the following conditions:
•
a Sagem Sécurité Wi-Fi™ USB adapter must be plugged in the rear USB
port of the terminal. Installation procedure is described in the
MorphoAccess
port of the terminal. Installation procedure is described in the
MorphoAccess
®
J Series Installation Guide,
•
a MorphoAccess
®
Wi-Fi™ Licence is loaded in the terminal (cf. paragraph
"Downloading a licence"),
•
the terminal must not be connected to a network with an Ethernet cable:
Wi-Fi™ connection and Ethernet cable connection are mutually exclusive.
Wi-Fi™ connection and Ethernet cable connection are mutually exclusive.
NOTE
Both Wi-Fi™ USB adapter and licence can be ordered under
the reference "MORPHOACCESS WI-FI PACK.
the reference "MORPHOACCESS WI-FI PACK.
NOTE
When DHCP mode is activated
A DHCP server and a DNS server are mandatory to use this
feature.
feature.
The DHCP server automatically attributes an IP address to the
MorphoAccess
MorphoAccess
®
.
The DNS server links the MorphoAccess
®
hostname to its real
IP address.
It is also important that the DNS server is updated each time the
DHCP server attributes another IP address to a
MorphoAccess
DHCP server attributes another IP address to a
MorphoAccess
®
.